The Convoy S2+ with SST20 (2024)

It already has me upset. I comes with group 1 enabled aparently. This has 5 solid modes, then three blinking modes. The last of these tricks you into thinking the light is off, then after some delay flashes into your eyes. I hate this. I still have a big "ball" burned into my vision.

So let's switch it to mode group 2, which has 5 solid modes and no blinking modes. Even set that way, it may find some way to blink at me and get me angry.

Switching it is a bit of a battle, but here is how it goes:

• Short tap many many times until the light goes out.
• Maybe turn the light off/on at this point?
• Immediately after the first buzz turn the light off/on.
• The light will blink once, then wait.
• The light will blink twice, then wait.
• Turn the light off immediately

Mode 2 gives 0.1, 1.0, 10.0, 35., 100.

I'll note that my testing of previous 12 mode "Biscotti" lights told me that the 100 mode was actually 50. I have yet to check if they have fixed this bug. It doesn't really matter. 50 percent, even with four 7135 was plenty bright.